Base only Nayoki Utility Mount Cookie Fuel

• Compatible headset: Cookie Fuel (replaces the original plate)
• Release system: ensured by the Cookie Fuel helmet itself (releasable helmet)
• Helmet attachment: 4 screws supplied (location of the original plate)
• Compatible camera interfaces: all Nayoki Utility Mount interfaces (Insta360 X3, X4, X5, DJI Osmo Action 6, GoPro Hero 9 to 13)

• Base manufactured using professional 3D printing, ready to assemble
• Modular architecture: universal for all Nayoki camera interfaces
• Multi-position rosette system: 7 angles for DJI, up to 9 angles for Insta360 (depending on the interface)
• Single screw locking: adjust and lock the angle in a single movement
• Anti-snag geometry compliant with FFP requirements
• Compact design to reduce wind drag
• Reinforced structure to withstand the stresses of free fall
• Meticulous finishing and systematic quality control
• Screws included: 4 helmet mounting screws + rosette screws for mounting the interface

✔ Official replacement part in case of breakage or wear
✔ Equip a second Cookie Fuel helmet to quickly switch between multiple setups
✔ Compatible with all your existing interfaces (Insta360, DJI and GoPro)
✔ Replaces the original license plate : clean and native integration
✔ Releasable helmet preserved The Cookie Fuel release system remains fully functional.
✔ Screws included ready to assemble upon receipt
✔ Made in France in my workshop

• Material : PETG or PETG-Carbon depending on the chosen variant
• Manufacturing: Professional 3D printing in my workshop in France
• Quality control: Each item is checked before shipment
• Product made to order: Each base is made especially for you.

1. Remove the original plate from your Cookie Fuel by unscrewing the 4 screws
2. Position the Nayoki base in the location of the original plate.
3. Secure the base using the 4 screws provided.
4. Position your camera interface (Insta360, DJI or GoPro) on the base
5. Insert and tighten the rosette screw to secure the interface and lock in the desired angle.
6. Test the edit in a controlled environment before the actual jumps.

⚠️ The 1/4-20 screw (Insta360 camera mount) is not included with this base alone. You reuse the one that originally came with your Nayoki camera interface. That's the modular logic of the system: each part only requires its own screws.

For the DJI Osmo Action 6, mounting is done using the Osmo Quick Release Bi-Directional Mounting Bracket (included with the DJI camera). For the GoPro Hero 9 through 13, mounting is done using the standard GoPro mounting system. No 1/4-20 screws are required for either model.

If you have lost your 1/4-20 screw, contact me for a replacement.

• PETG (Premium): Increased resistance to shocks and temperature variations, ideal for most uses
• PETG-Carbon (Expert): Maximum rigidity and resistance, professional matte black finish, recommended for heavy-duty use

The geometry of the Nayoki Utility Mount Cookie Fuel base was designed in accordance with the requirements of the French Parachuting Federation : no sharp angles, no catching edges, no roughness likely to catch a suspension line when opening.

The release system used is the original Cookie Fuel system — it is the helmet manufacturer who designed and validated this release mechanism. No modifications, no tinkering, no compromise to the integrity of your equipment.

The assembly and use of this support remain the responsibility of the user and the technical manager of their jump center.

There base is specific to Cookie Fuel, that's the’camera interface which is interchangeable depending on your model. This allows you to own multiple interfaces and switch between them according to your recording needs. The interfaces are also compatible with the bases of other Nayoki headphones: a single interface can be used with both Cookie Fuel and Cookie G35 headphones.

Available camera interfaces:

• Insta360 X3 Interface
• Insta360 X4 Interface
• Insta360 X5 Interface
• DJI Osmo Action 6 Interface
• GoPro Hero 9 to 13 interface

• Interface change video

Designed, manufactured and tested by Connec7e, a French workshop combining parachuting, 3D printing and functional design.
Fall. Get back up. Create.