DJI Osmo Action 6 Interface Only — Nayoki Utility Mount Cookie G35
Are you changing cameras or do you want to be able to quickly switch between your setups? This interface only for DJI Osmo Action 6 mounts on your base Nayoki Utility Mount G35 existing in seconds. No need to buy all the support again — that's exactly the principle of Nayoki's modular architecture: The basic structure remains the same, the interface changes..
Made using 3D printing in my French workshop. The DJI camera mount uses the Osmo quick-release, two-way mounting bracket originally supplied with your camera.
⚠️ This interface alone requires the Nayoki Utility Mount G35 base. If you don't already have one, opt for the complete pack Nayoki Utility Mount G35 — DJI Osmo Action 6 which includes the base + the interface.
Recommended accessories and add-ons
- Nayoki Utility Mount G35 Complete Pack If you don't already have the basics: see the pack
🧩 Compatibility
- Compatible camera: DJI Osmo Action 6
- Support required: Nayoki Utility Mount G35 base (sold separately or in packs)
- Compatible headset: Cookie G35 (via Nayoki base)
- Camera mounting: via the Osmo Quick Release Bi-directional Mounting Bracket (supplied with the DJI camera)
⚡ Features
- Interface manufactured using professional 3D printing, ready to assemble
- Compatible with the multi-position rosette system from the Nayoki base (7 angles for DJI)
- Anti-snag geometry compliant with FFP requirements
- Designed for the Osmo Two-Way Mount : preserves the DJI ecosystem
- Compact design to reduce wind drag
- Reinforced structure to withstand the stresses of free fall
- Meticulous finishing and systematic quality control
💡 Key Benefits
✔ Modular architecture Expand your Nayoki setup without buying everything again
✔ Quick switch between several camera interfaces
✔ Economic Save the price of a base if you already have one
✔ Compatible with the DJI ecosystem : uses the native support provided with the camera
✔ Lightweight and compact : optimized for freefall
✔ Made in France in my workshop
📦 Manufacturing and materials
- Material : PETG or PETG-Carbon depending on the chosen variant
- Manufacturing: Professional 3D printing in my workshop in France
- Quality control: Each item is checked before shipment
- Manufacturing time: 1 à 2 jours ouvrés
- Product made to order: Each interface is custom-made for you.
🪛 Installation
- Remove your current camera interface from the Nayoki Utility Mount G35 base (by loosening the rosette screw)
- Position the new DJI Osmo Action 6 interface on the base
- Place the Osmo Quick-Release Bidirectional Mounting Bracket (supplied with the DJI camera) onto the interface
- Tighten the rosette screw: it goes through the DJI mount's mounting hole and locks the assembly in place.
- Clip your DJI Osmo Action 6 onto the two-way mount
- Test the edit in a controlled environment before the actual jumps.
🧠 Important note about the DJI Osmo Action 6
The interface uses the Osmo quick-release, two-way mounting bracket supplied originally with the DJI camera. To maintain minimal bulk and maximum rigidity, The DJI mount's quick-release function is disabled. In this configuration: the Nayoki system's rosette screw passes through the DJI mount's mounting hole, locking it in place.
This is a deliberate choice that prioritizes strength and compactness — release in case of snagging remains ensured by the native system of the G35 helmet.
⚠️ The rosette screw is not included in this interface alone. You reuse the one originally supplied with your Nayoki Utility Mount G35 base. This is the modular logic of the system: each part only requires its own specific screws.
If you have lost your rosette screw, contact me for a replacement.
🎯 Material selection
- PETG (Premium): Increased resistance to shocks and temperature variations, ideal for most uses
- PETG-Carbon (Expert): Maximum rigidity and resistance, professional matte black finish, recommended for heavy-duty use
🧩 The Nayoki modular system
There The Nayoki Utility Mount G35 base is universal., that's the’camera interface which is specific to your model. This allows you to have multiple interfaces and switch between them according to your recording needs, without ever having to disassemble the base of your headset.
Other interfaces available:
- Insta360 X3 Interface
- Insta360 X4 Interface
- Insta360 X5 Interface
Created by Connec7e
Designed, manufactured and tested by Connec7e, a French workshop combining parachuting, 3D printing and functional design.
Fall. Get back up. Create.