Nayoki Utility Mount Cookie G35 – Skydiving Camera Mount

L'’Insta360 X6 is now supported, and with a full compatibility The battery compartment and USB cover remain accessible when the camera is mounted. You change the battery and recharge. without ever removing the camera from the mount, and without any additional accessories. This is where the X6 interface goes further than the X5. The interface uses the exact same universal base as the rest of the range: if you already own a Nayoki Utility Mount Cookie G35, you don't need that the interface to control to switch to your new camera.

To my knowledge, this is the first skydiving mount specifically designed for the Insta360 X6 available for sale. Designed, printed, and tested in jumps from my workshop in France.

• Compatible headset: Cookie G35 (native integration via the utility plate)
• Compatible cameras depending on the variant: Insta360 X6, Insta360 X5, Insta360 X4, Insta360
• Release system: native Cookie G35, no helmet modifications
• Insta360 camera mount: standard 1/4-20 thread
• GoPro camera mount: via the standard GoPro finger mounting system
• DJI camera mount: via the Osmo Quick Release Bi-directional Mounting Bracket (supplied with the DJI camera)

• Support manufactured using professional 3D printing, ready to assemble
• Modular architecture: G35 universal base + interchangeable camera interface
• Battery access and USB port preserved on the Insta360 X6 interface, without disassembling the camera
• Multi-position rosette system: 7 angles for DJI and GoPro, up to 9 angles for Insta360
• Single screw locking: adjust and lock the angle in a single movement
• Anti-snag geometry compliant with FFP requirements
• Compact design to limit wind resistance during freefall
• Reinforced structure to withstand the stresses of opening
• Meticulous finishing and systematic quality control
• Complete set of screws included (Mount attachment + 1/4-20 screw for Insta360)

✔ Native G35 integration : exploits the original Cookie drop system
✔ Compliant with FFP recommendations : geometry without hooks for the suspension lines
✔ Reliable multi-angles : adjustment rosette that locks once tightened
✔ Modular architecture Are you changing cameras? You just need to buy the interface again.
✔ Fully compatible with Insta360 X6 : battery and USB accessible, camera mounted
✔ No drilling of the helmet, no modifications, warranties preserved
✔ Tested in real-world conditions freefall for over a year
✔ Supplied complete with screws Ready to assemble upon receipt
✔ Made in France, checked piece by piece before shipment

• Material : PETG or PETG-Carbon depending on the chosen variant
• Manufacturing: Professional 3D printing in my workshop in France
• Quality control: Each item is checked before shipment
• Product made to order: Each item is made especially for you; please allow 3 to 4 days for production before shipping.

1. Insert the Nayoki base into the utility plate of your Cookie G35
2. Lock the base using the helmet's original release system.
3. For Insta360 X6, X5, X4 and X3: Attach your camera to the interface using the supplied 1/4-20 screw
4. For GoPro Hero 9 to 13: Engage the standard GoPro mounting fingers into the interface, then tighten the original GoPro knob.
5. For DJI Osmo Action 6: Mount the Osmo Quick Release Bidirectional Mounting Bracket (supplied with the camera) onto the interface; the mounting screw passes through the pre-drilled hole on the DJI mount.
6. Choose your capture angle from the available positions on the rosette
7. Tighten the rosette screw to permanently fix the angle
8. Test the edit in a controlled environment before the actual jumps.

The rosette system allows the capture angle to be adjusted. and lock it with the same screw. Once tightened, the angle is fixed: no drift during the jump, no surprises when watching. To adjust, simply loosen, reposition, and tighten.

Insta360 X6: The interface was designed to maintain full access to the camera's openings. The battery compartment and USB cover can be opened with the camera in place, without disassembly or an external charger. In practice, the grip under the finger is slightly less secure than with the camera bare, since the covers can no longer be grasped from below, but both can still be opened.

Insta360 X5: The Insta360 X5's charging port is located underneath the camera and is inaccessible once the interface is mounted. To ensure maximum rigidity and sturdiness, the interface base is designed without any openings. Using an external battery charger is highly recommended to recharge the camera without having to remove it from the mount and avoid repeated handling. I use and recommend it. this charger on a daily basis.

GoPro Hero 9 to 13: The GoPro Hero 9, 10, 11, 12, and 13 share the exact same dimensions and finger-mount system, ensuring complete compatibility with the interface. The camera attaches via the standard GoPro mounting system, and then the angle is locked in place with the Nayoki system's rosette screw.

DJI Osmo Action 6: the interface uses the Osmo quick-release, two-way mounting bracket supplied originally with the DJI camera. To maintain minimal bulk and maximum rigidity, The DJI mount's quick-release function is disabled. In this configuration: the Nayoki system's mounting screw passes through the DJI mount's mounting hole, locking it in place. This is a deliberate design choice that prioritizes strength and compactness, while the G35 headset's native release mechanism ensures safe release in case of snagging.

• PETG (Premium): Increased resistance to shocks and temperature variations, ideal for most uses. Available in black, white, dark blue, gray, yellow, and red.
• PETG-Carbon (Expert): Maximum rigidity and resistance, professional matte black finish, recommended for intensive use such as tandem videographers. Available in black only.

The geometry of the Nayoki Utility Mount Cookie G35 was designed in accordance with the requirements of the French Parachuting Federation No sharp angles, no catching edges, no roughness that could catch a suspension line during opening. The release system used is the original one from the Cookie G35, it is the helmet manufacturer who designed and validated this release mechanism. No modifications, no tinkering, no compromise to the integrity of your equipment.

The assembly and use of this support remain the responsibility of the user and the technical manager of their jump center.

There base is universal, that's the’camera interface which is specific to your model. Are you changing cameras? No need to buy the entire mount again: simply order the’interface only matching your new camera. Are you hesitating between Insta360, GoPro, and DJI? Buy several interfaces and switch between them as needed for your recording requirements.

Available interfaces:

• Insta360 X6 (new)
• Insta360 X5
• Insta360 X4
• Insta360 X3
• GoPro Hero 9 to 13
• DJI Osmo Action 6

You fly with a Cookie Fuel The same architecture exists in a dedicated version: Nayoki Utility Mount Cookie Fuel.

Should the helmet be drilled or modified?
Never. The base slides into the utility plate and locks with the original Cookie release system. No drilling, no gluing, manufacturer's warranty preserved.

Does the support pass the technical inspection at the jump center?
The geometry was designed in accordance with FFP requirements, and the release system is the one validated by Cookie. Final validation remains the responsibility of your center's technical manager.

I'm upgrading from the Insta360 X5 to the X6, do I have to buy everything again?
No. The base is the same, only the interface is different. Order the Insta360 X6 interface separately.

Can I change the battery of my Insta360 X6 without removing the stand?
Yes. The X6 interface maintains access to the battery compartment and USB port, even with the camera mounted. No external charger is needed, unlike the X5 configuration.

PETG or PETG-Carbon, which to choose?
PETG is perfectly adequate for recreational use. PETG-Carbon offers greater rigidity and a matte black finish; it's recommended if you do a lot of jumping, especially tandem video.

What is the delivery time?
Each item is made to order; please allow 3 to 4 days for production before shipping. Free delivery on orders over €60.

Is the STL file available?
No, this model is only offered as a finished product.

Legitimate question, honest answer: this product required a lot of R&D, prototyping, and real-world testing. Offering it as an STL file is tantamount to offering it up for immediate copying. Therefore only as a finished product, Made in France, checked one by one before shipment.

• External battery charger to recharge the’Insta360 X5 without disassembling the support: See on Amazon
• Side Plates Cookie G35 to complete the helmet customization: view product
• Speedometer and altitude counter Free to overlay your telemetry data into your jump videos: access the tool

• Insta360 X5 Assembly Tutorial
• DJI Osmo Action 6 Assembly Tutorial
• Camera interface change in 30 seconds

Designed, manufactured and tested by Connec7e, a French workshop combining parachuting, 3D printing and functional design.
Fall. Get back up. Create.