180mm Japanese-style furniture handle – 90mm center-to-center distance
9,90 € Tax Inc.
A furniture handle at minimalist design inspired by Japanese, designed to provide a simple and contemporary finish to a furniture door, a cupboard, a wardrobe or a custom-made layout.
Its deliberately clean proportions allow it to integrate equally well with modern furniture as with a more natural or minimalist design.
With its 180 mm in length and its fixing center distance of 90 mm, It was designed as a truly functional piece intended for everyday use.
📐 Dimensions
- Length : 180 mm
- Width : 18 mm
- Total depth: 28 mm
- Mounting hole spacing: 90 mm
- Number of fixing points: 2
- Diameter of pilot holes: Ø 3.2 mm
- Depth of pilot holes: approximately 15 mm
🧩 Available directions
Several Nayoki marking orientations are available to adapt the handle to your furniture:
- Horizontal mounting: logo facing right
- Horizontal mounting: logo facing left
- Vertical mounting: adapted logo orientation
This design makes it possible to equip several doors or drawers while maintaining a consistent visual orientation.
🔩 Fixing
The handle uses two attachment points spaced apart 90 mm.
The pilot holes of Ø 3.2 mm allow a M4 screws to be inserted directly into the printed material.
These are not free-flowing holes for an M4 screw.
The length of the screws must be chosen according to the thickness of the door or panel on which the handle is installed.
Avoid overtightening to prevent damaging the threads created in the part.
🏠 Possible uses
This handle is particularly suitable for:
- Furniture doors
- Cupboards
- Cabinets
- Buffets
- Kitchen furniture
- Workshop furniture
- Storage
- Outdoor kitchens
- Furniture and fittings compatible with its fixing system
💡 Key Benefits
✔ Minimalist design inspired by Japanese
✔ Generous 180 mm format
✔ Precise 90 mm center-to-center distance
✔ Horizontal or vertical installation
✔ Several logo orientations available
✔ Original Nayoki design
✔ On-demand manufacturing using 3D printing
📦 Manufacturing
- Design : original Nayoki model
- Manufacturing: 3D printing in our workshop in France
- Control : Each item is checked before shipment
- Made to order: Each handle is produced specifically for your order.
Nayoki Creation
Designed and manufactured by Connec7e under the brand Nayoki, This handle was developed as a truly functional element and not just as a decorative accessory.
Fall. Get back up. Create.
Reviews