Insta360 X6 Interface – Nayoki Utility Mount

This is the true evolution of this interface. Unlike the Insta360 X5 version, the X6 interface was designed for preserve full access to the camera openings. The battery compartment and USB cover open camera mounted on the bracket.

In practical terms: you can change the battery between jumps without disassembling anything, and you can recharge without an external charger. Over a day of jumping, it's the kind of detail that makes all the difference.

To be perfectly honest, the grip under your finger is slightly less secure than with a bare camera, since you can no longer grasp the covers from underneath. However, both can still be opened without tools.

• Compatible camera: Insta360 X6
• Support required: Nayoki Utility Mount base (sold separately or in packs)
• Compatible helmets: Cookie G35 and Cookie Fuel, via the corresponding Nayoki database
• Camera mounting: standard 1/4-20 thread
• Not compatible: Insta360 X5, X4 and X3, which have different casings. A dedicated interface exists for each.

• Interface manufactured using professional 3D printing, ready to assemble
• Battery access and USB port preserved, without disassembling the camera
• Compatible with the multi-position rosette system from the Nayoki base, up to 9 angles
• Anti-snag geometry compliant with FFP requirements
• Compact design to limit wind resistance during freefall
• Reinforced structure to withstand the stresses of opening
• Meticulous finishing and systematic quality control
• 1/4-20 screw included for mounting the camera

✔ Modular architecture Expand your Nayoki setup without buying everything again
✔ Full X6 compatibility : battery and USB accessible, camera mounted
✔ No accessories needed No external charger, unlike the X5
✔ Quick switch between several camera interfaces
✔ Economic You save the price of a base if you already have one.
✔ Compatible with G35 and Fuel : the same interface on both Nayoki bases
✔ 1/4-20 screw included ready to assemble upon receipt
✔ Made in France, checked piece by piece before shipment

• Material : PETG or PETG-Carbon depending on the chosen variant
• Manufacturing: Professional 3D printing in my workshop in France
• Quality control: Each item is checked before shipment
• Product made to order: Each interface is custom-made for you; please allow 3 to 4 days for manufacturing before shipping.

1. Loosen the rosette screw and remove your current camera interface from the Nayoki Utility Mount base
2. Attach your Insta360 X6 to the new interface using the supplied 1/4-20 screw
3. Position the Insta360 X6 interface on the base
4. Choose your capture angle from the available positions on the rosette
5. Tighten the rosette screw to secure the interface and lock the angle.
6. Test the edit in a controlled environment before the actual jumps.

⚠️ The rosette screw is not included in this interface alone. You reuse the one that originally came with your Nayoki Utility Mount base. That's the modular logic of the system: each part only requires its own specific screws.

If you have lost your rosette screw, contact me for a replacement.

Regarding angle locking: The rosette screw serves both to secure the interface and to fix the pickup angle. Once tightened, the angle remains fixed throughout the jump. To adjust, simply loosen, reposition, and tighten.

• PETG (Premium): Increased resistance to shocks and temperature variations, ideal for most uses. Available in black, white, dark blue, gray, yellow, and red.
• PETG-Carbon (Expert): Maximum rigidity and resistance, professional matte black finish, recommended for intensive use such as tandem videographers. Available in black only.

There Nayoki Utility Mount base remains on the helmet, that's the’camera interface which is specific to your model. This allows you to have multiple interfaces and switch between them according to your recording needs, without ever having to disassemble the base.

Other interfaces available:

• Insta360 X5 Interface
• Insta360 X4 Interface
• Insta360 X3 Interface
• GoPro Hero 9 to 13 interface
• DJI Osmo Action 6 Interface

Legitimate question, honest answer: this product required a lot of R&D, prototyping, and real-world testing. Offering it as an STL file is tantamount to offering it up for immediate copying. Therefore only as a finished product, Made in France, checked one by one before shipment.

• Speedometer and altitude counter Free to overlay your telemetry data into your jump videos: access the tool

• Camera interface change in 30 seconds

Designed, manufactured and tested by Connec7e, a French workshop combining parachuting, 3D printing and functional design.
Fall. Get back up. Create.